Kia Rio: Thermostat: Components - Cooling System - Engine Mechanical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Thermostat: Components


1. Water inlet fitting
2. Thermostat
3. Heater pipe
4. Water temp control assembly
5. Water temperature sensor
6. Gasket

Coolant: Refilling And Bleeding
   Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...

Thermostat: Removal
   Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. ...

See also:

Catalytic Converter
Description The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx). ...

Low brake fluid level warning
If the warning light remains on, it may indicate that the brake fluid level in the reservoir is low. If the warning light remains on: 1.Drive carefully to the nearest safe location and stop your v ...

Valve Body Description
The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regula ...

Copyright www.kirmanual.com 2014-2026