Kia Rio: Starter: Specification
Starter [Non-ISG type]
| Item |
Specification |
|
| Rated voltage |
12 V, 0.9 kW |
|
| The number of pinion teeth |
10 |
|
| Performance [No-load, 11.5 V] |
Ampere |
Max. 60 A |
| Speed |
Min. 5,500 rpm |
|
Starter [ISG type]
| Item |
Specification |
|
| Rated voltage |
12 V, 1.3 kW |
|
| The number of pinion teeth |
11 |
|
| Performance [No-load, 12 V] |
Ampere |
Max. 95 A |
| Speed |
Min. 3400 rpm |
|
Starter: Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Starter: Components
1. Screw
2. Front housing
3. Stop ring
4. Stopper
5. Overunn clutch
6. Lever
7. Lever plate
8. Lever packing
9. Magnet switch assembly
10. Armature assemb ...
See also:
Removal
1.
Remove the cyliner head cover.
(Refer to Timing System)
2.
Remove the timing chain cover.
(Refer to Timing System)
...
TPMS Receiver Replacement
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
Installation
When replacing the ECM, the vehicle equipped with immobilizer
must be performed the procedure as below.
...
Copyright © www.kirmanual.com 2014-2024