Kia Rio: Circuit Diagram

Signal Waveform

...

Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Spe ...

See also:

Installation
1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3 ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Spe ...

Seat Belt Switch Inspection
1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...