Kia Rio: Seat Belt Switch Installation

Seat Belt Switch Removal

1. Remove the front seat. 2. After loosening the mounting bolt, then remove the front seat belt buckle (A). ...

Hood switch Description

The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety re ...

See also:

Oil Pump Unit (OPU) Inspection
OPU Problem Inspection Procedure 1. TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis ground using the backside of OPU harness connector ...

Ending voice recognition
While Voice Recognition is operating Press and hold the key on the steering remote controller (over 0.8 seconds) While using voice command, pressing any steering wheel control or a differen ...

Trunk
Opening the trunk With the trunk lid release lever To open the trunk from inside the vehicle, pull up the trunk lid release lever. The trunk will automatically lock when the trunk lid closes. & ...