Kia Rio: Inspection - Manual Transaxle System - Kia Rio UB 2012-2025 Service ManualKia Rio: Inspection

Manual Transaxle Oil Inspection
1.
Park the vehicle on a level ground and stop the engine.
2.
Retighten the oil filler plug (A) with a new washer.


3.
Check level with finger.

     
Oil level must be up to fill the hole, if not, add oil until it runs over.


4.
Install filler plug.

Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)

Manual Transaxle Oil Replacement
1.
Park the vehicle on a level ground and stop the engine.
2.
Drain the manual transaxle oil after loosening the drain plug (A).


3.
Install the drain plug with new gasket.

Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0kgf.m, 43.4 ~ 57.9 lb-ft)

4.
Add new oil through the filler plug hole and, fill it just below the plug opening.

Standard oil: SAE 75W/85, API GL-4
Oil capacity: 1.8 ~1.9L (0.48 ~0.50 U.S.gal., 1.90 ~ 2.0 U.S. qt., 1.58 ~ 1.67 lmp qt.)

Special Service Tools
Tool (Number and Name) Illustration Use 09200-38001,3N000 (Beam) 09200-1P100, 4X000 (Adapter) 09200-2S200 (Supporter) Engine support assembly ...

Manual Transaxle Components
1. Transaxle support mounting bracket 2. Control shaft complete 3. Back up lamp switch 4. Vehicle speed sensor ...

See also:

Special Service Tools
Tool (Number and Name) Illustration Use 09581-11000 Piston expander Spreading the front disc brake piston 09580 - 0U000 Brak ...

Starter: Removal and Installation
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to EM group) 3. ...

Installation
1. Install in the reverse order of removal.    • ...

Copyright www.kirmanual.com 2014-2025