Kia Rio: Input Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2026 Service ManualKia Rio: Input Speed Sensor Specifications

▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.2 ~ 1.8)
0.0472 ~ 0.0709
Output voltage(V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data ...

Input Speed Sensor Circuit Diagram
...

See also:

Inspection
1. Check for DTCs.    • If a DTC ...

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Refrigerant System Service Basics
Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system. ...

Copyright www.kirmanual.com 2014-2026