Kia Rio: Rear Hub - Carrier Inspection

1.	Check the hub for cracks and the splines for wear.

2.	Check the brake disc for scoring and damage.

3.	Check the rear axle carrier for cracks

4.	Check the bearing for cracks or damage.

Rear Hub - Carrier Replacement

[Drum Type] 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Suspension System

...

See also:

Removal
1. Turn ignition switch OFF, and disconnect the negative (-) battery cable. 2. Remove the battery and ECM. (Refer to Engine Electr ...

Inhibitor Switch Circuit Diagram
...

Starter: Components
1. Screw 2. Front housing 3. Stop ring 4. Stopper 5. Overunn clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch assembly 10. Armature assemb ...

Categories

Copyright © www.kirmanual.com 2014-2025