Kia Rio Manuals

Kia Rio: Tire Removal - Tires/Wheels - Suspension System - Kia Rio UB 2012-2026 Service ManualKia Rio: Tire Removal

1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing machine .



     
•
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
•
Avoid tire/tool contact with the valve on dismount.
•
Dismount should end near the valve.
3.
Rotate the wheel clockwise.
Tire Wear
   • Using tires and wheel other than the recommended sizes could cause unusual handling ...

Tire Installation
1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

See also:

TPMS Sensor Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...

Removal
1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~79.6 lb-ft) ...

Audio system
If you install an aftermarket HID head lamp, your vehicle’s audio and electronic device may malfunction. Antenna Your vehicle uses a roof antenna to receive both AM and FM broadcast signals. ...

Categories

Copyright www.kirmanual.com 2014-2026