Kia Rio: Front Impact Sensor (FIS) Components

Front Impact Sensor (FIS) Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the F ...

Front Impact Sensor (FIS) Removal

   • Removal of the airbag must be performed according to the precautions/ procedures des ...

See also:

Transmitter Code Registration (Using GDS)
1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. ...

Antenna Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable and the connector (A). ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...