Kia Rio: Curtain Airbag (CAB) Module Description - Airbag Module - Restraint - Kia Rio UB 2012-2026 Service ManualKia Rio: Curtain Airbag (CAB) Module Description

Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.

     
Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Side Airbag (SAB) Module Installation
   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Curtain Airbag (CAB) Module Components
...

See also:

Starter: Inspection
Starter Solenoid Inspection 1. Disconnect the lead wire from the M-terminal of solenoid switch. 2. Connect the battery as shown. If ...

Output Speed Sensor Circuit Diagram
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the variable intake solenoid valve connector ( ...

Copyright www.kirmanual.com 2014-2026