Kia Rio: Brake Pedal

Installation

1. Installation is the reverse of removal.    Use a new washer (A) whenever ...

Components

1. Brake pedal member assembly 2. Stop lamp switch 3. Pedal bushing 4. Return spring 5. Brake pedal 6. Brake pedal pad ...

See also:

Anchor Pretensioner (APT) Installation
1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Valve Body Installation
1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Blower Resistor (MANUAL) Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...