Kia Rio: Audio Remote Control Removal - Audio - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Audio Remote Control Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring")
3.
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
4.
Remove the steering wheel cover (A) after loosening 6 screws.


5.
Remove the remote control switch (B) after loosening 2 screws and disconnecting the connector (A).


[RH]


[LH]


Audio Remote Control Inspection
1. Check the audio remote control switch (A) for resistance between No.5 and No.7 terminals in each switch position. Switch Connect ...

Audio Remote Control Installation
1. Reassemble the steering wheel remote control switch after connecting the connector. 2. Reassemble the steering wheel. ...

See also:

License Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp lens by pushing the clip (A). 3. ...

SS-A Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System and lap/shoulder belts at both the driver and passenger seating position. The indications of the system's prese ...

Copyright www.kirmanual.com 2014-2026