Kia Rio: Spark Plug: Installation - Ignition System - Engine Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Spark Plug: Installation

1.
Install in the reverse order of removal.

Spark Plug Installation :
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)

Spark Plug: Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Charging System
...

See also:

Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. Do not place objects in the rear seat which would interfere with y ...

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And Exhaus ...

Copyright www.kirmanual.com 2014-2026