Kia Rio: Spark Plug: Specification - Ignition System - Engine Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Spark Plug: Specification

Item
Specification
Type
SILZKR6B10E
Gap
0.9 ~ 1.0 mm (0.0354 ~ 0.0394 in.)

Spark Plug: Description
A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by mean ...

Spark Plug: Inspection
[On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. ...

See also:

Photo Sensor (FATC only) Description
The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving port ...

Fluid Service Adjustment Procedure
Oil level Check    A check of ATF level is not normally required during scheduled services. If an oil leak is ...

Description
Due to the considerably more frequent occurrence of starting operations, the electrical load that occurs often leads to voltage dips in the vehicle network. In order to stabilize the power s ...

Copyright www.kirmanual.com 2014-2026