Kia Rio: Specification - Canister Close Valve (CCV) - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2026 Service ManualKia Rio: Specification

Item
Specification
Coil Resistance (Ω)
19.8 ~ 20.8 [20°C(68°F)

Description
Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during ...

Circuit Diagram
(M/T) (A/T) ...

See also:

Components
1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Seat Belt Pretensioner (BPT) 5. Pressure Side Impact Sensor (P-SIS) 6. Side Impact Sensor (SIS) 7. Side Airbag ...

Installation
   • Install the component with the specified torques. • ...

Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Copyright www.kirmanual.com 2014-2026