Kia Rio: Start/Stop Button Installation

Start/Stop Button Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the Audio. (Refer to the BE group - "Audio") 3. ...

Ignition Switch Assembly Inspection

1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...

See also:

Specification
Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.275 ~ 0.475 W.O.T 3.8 ~ 4.4 1.75 ~ 2.35 ...

Dynamic Damper Installation
1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. 2. Install the dynamic damper. ...

Circuit Diagram (2)
...