Kia Rio: Troubleshooting - Emission Control System - Kia Rio UB 2012-2026 Service ManualKia Rio: Troubleshooting

Symptom
Suspect area
Engine will not start or hard to start
Vapor hose damaged or disconnected
Engine struggles to start
Malfunction of the Purge Control Solenoid Valve
Rough idle or engine stalls
Vapor hose damaged or disconnected
Malfunction of the PCV valve
Rough idle
Malfunction of the Evaporative Emission Control System
Excessive oil consumption
Positive crankcase ventilation line clogged

Tightening Torques
Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.8 ~ 1.2 7.8 ~ 11.8 5.8 ~ 8.7 Canister installati ...

Schematic Diagram
...

See also:

Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Dynamic Damper Components
1. BJ assembly 2. Circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 1 ...

Copyright www.kirmanual.com 2014-2026