Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2026 Service ManualKia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Direct control VFS[35R/C]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
50 ~ 850
 Internal resistance(Ω)
5.1

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brake. ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram
...

See also:

4Door Front Body B
Hood hinge mounting hole (Ø11) Fender apron upper member tooling hole (Ø6.6) Engine mounting hole (&O ...

Yaw-rate and G Sensor Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the front seat (LH) assembly. (Refer to the Bo ...

Oil Pump Unit (OPU) Connector
Opu Connector Terminal Function EGGG114-A EGGG114-B Pin No. Description Pin No. Description 1 Motor power(W) ...

Copyright www.kirmanual.com 2014-2026