Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Steering Gear box Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

TPMS Receiver Operation
1. General Function A. Auto-learn takes place only once per Ignition cycle. B. On successful compl ...

Replacement
The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...