Kia Rio: Front Suspension System
- Components Location
- Front Strut Assembly Components
- Front Strut Assembly Replacement
- Front Strut Assembly Disassembly and Reassembly
- Front Strut Assembly Inspection
- Front Lower Arm Replacement
- Front Lower Arm Inspection
- Front Stabilizer Link Replacement
- Front Stabilizer Link Inpesction
- Front Stabilizer Bar Replacement
- Front Stabilizer Bar Inspection
- Sub Frame Replacement
Troubleshooting
Vehicle inspection
SYMPTOM CHART
Symptom
Suspect Area
Remedy (See page)
Squeak or grunt-noise from the front suspension, occurs more
in cold ambient t ...
Components Location
1. Sub frame
2. Drive shaft
3. Lower arm
4. Strut assembly
5. Steering gearbox
6. Stabilizer bar
...
See also:
Output Speed Sensor Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.85 ~ 1.3)
0.0335 ~ 0.0512
Output volt ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
Copyright © www.kirmanual.com 2014-2024