Kia Rio: Instrument Cluster Installation - Indicators And Gauges - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Instrument Cluster Installation

1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the center fascia panel.
Instrument Cluster Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or romover, remove the cluster fascia panel (A). ...

Troubleshooting
Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) is blown Check for short and replace fuse Speedometer faulty ...

See also:

Cruise Control Switch: Installation
1. Install in the reverse order of removal. ...

Rear Wheel Speed Sensor Removal
1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage ...

Copyright © www.kirmanual.com 2014-2026