Kia Rio Manuals

Kia Rio: Room Lamp Removal - Lighting System - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Room Lamp Removal

Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove room lamp lens (B).
3.
Remove the room lamp assembly (A) after loosening th mounting screws.
4.
Disconnect the connector (A).
5.
If it is necessay, replace the room lamp bulb (A).
Vanity Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the vanity lamp assembly (A) after disconnecting the connector (B).
Luggage Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage lamp assembly (A) after disconnecting the connector (B).
[4 Door]


[5 Door]
Room Lamp Inspection
Room Lamp Remove the room lamp assembly then check for continuity between terminal. If the continuity is not as specified, replace the room lamp assemlby. ...

Room Lamp Installation
Room Lamp 1. Install the room lamp assembly after connecting the room lamp connector. 2. Install the room lamp lens. ...

See also:

Lighting control
The light switch has a Headlight and a Parking light position. To operate the lights, turn the knob at the end of the control lever to one of the following positions: (1) OFF position (2) Parking ...

Vehicle load limit
Tire and loading information label The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be ...

BCM connectors
Pin No. Connector A Connector B Connector C 1 Battery (+) K_LINE Turn signal switch (RH) 2 Ignition 2 Centr ...

Categories

Copyright www.kirmanual.com 2014-2026