Kia Rio: Start/Stop Button Installation

Start/Stop Button Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the Audio. (Refer to the BE group - "Audio") 3. ...

Ignition Switch Assembly Inspection

1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...

See also:

Compressor Disassembly
1. Remove the RH front tire. (Refer to SS group - “Front Tire�) 2. Remove the engine room RH side under cover. (Refer to EM ...

SS-A Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

BCM connectors
Pin No. Connector A Connector B Connector C 1 Battery (+) K_LINE Turn signal switch (RH) 2 Ignition 2 Centr ...