Kia Rio: Engine Electrical System

Muffler: Removal and Installation

1. Disconnect the battery negative terminal. Tightening torque Without battery sensor : 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...

Specification

Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.75 ± 15％ [20°C (68°F)] Secondary Coil R ...

See also:

Output Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Troubleshooting Guide
Before Thinking The Product Has Malfunctioned 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual de ...

Line Pressure Control Solenoid Valve Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...