Kia Rio: DC/DC Converter: Component Location

AGM Battery: Cleaning

1. Make sure the ignition switch and all accessories are in the OFF position. 2. Disconnect the battery cables (negative first). ...

DC/DC Converter: Circuit Diagram

   In the ISG mode, if the power of an audio system turnsOFF by drawdown while “Auto Starting” or “Idle Starting”functi ...

See also:

Start/Stop Button Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the Audio. (Refer to the BE group - "Audio") 3. ...

Spark Plug: Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Accelerator Pedal Installation
1. Installation is reverse of removal. Accelerator pedal module installation nut: 12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb- ...