Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2026 Service ManualKia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Direct control VFS[35R/C]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
50 ~ 850
 Internal resistance(Ω)
5.1

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brake. ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram
...

See also:

Temperature Control Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the driver side shower duct (A) after loosening the screw. ...

Turn Signal Lamp (Door mirror) Installation
Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

Electric Oil Pump: Description
This transaxle has a standard Mechanical Oil Pump (MOP) linked to the input shaft to generates oil pressure when input shaft rotates. But, this transaxle equipped with ISG system also has ...

Copyright www.kirmanual.com 2014-2026