Kia Rio: Brake Pedal

Installation

1. Installation is the reverse of removal.    Use a new washer (A) whenever ...

Components

1. Brake pedal member assembly 2. Stop lamp switch 3. Pedal bushing 4. Return spring 5. Brake pedal 6. Brake pedal pad ...

See also:

Compression Pressure Inspection
   If there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. ...

In car sensor (FATC only) Description
The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the r ...

Passenger Airbag (PAB) ModuleInstallation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...