1. |
Disconnect the battery (-) terminal.
|
2. |
Remove the console assembly.
(Refer to the BD group - "Console")
|
3. |
Remove the seat heater switch (A) and disconnect the connector.
|
On-vehicle Inspection
Inspect ignition coil assembly and
Perform spark test
1.
Check for DTCs.
...
Front Impact Sensor (FIS) Components
...
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...