Kia Rio: Fuses And Relays

Seat Heater Switch Installation

1. Install the seat heater switch. 2. Install the console assembly. 3. Connect the battery (-) terminal. ...

Component Location

1. PCB fuse & relay box (Head lamp low/ hi, Fuel pump #1, HAC, Engine control, Front wiper, Rain sensor, Blower, Cooling fan low/ hi, Horn, Buglar alarm horn, Start relay) ...

See also:

SRS Control Module (SRSCM) Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Driver Airbag (DAB) Module and Clock Spring Description
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The ...

Specifications
Item Requirement Remark Rated voltage DC 12V Shall activate normally in these range. Operating voltage range DC 9 ~ 16V ...