Kia Rio: Room Lamp Inspection

Room Lamp

Remove the room lamp assembly then check for continuity between terminal. If the continuity is not as specified, replace the room lamp assemlby.

Turn Signal Lamp (Door mirror) Installation

Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

Room Lamp Removal

Room Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove room lamp lens (B). 3. Remove ...

See also:

Special Service Tools
Tool(Number and Name) Illustration Use 09495-3K000 Band installer Installation of ear type boot band 09495-33000 Puller ...

Tightening Torque
Items N.m kgf.m lb-ft Front and rear doors Door hinge to body 34.3 ~ 41.2 3.5 ~ 4.2 25.3 ~ 30.4 Door hinge to door ...

SS-B Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...