Kia Rio Manuals

Kia Rio: Ambient Temperature Sensor Inspection - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2026 Service ManualKia Rio: Ambient Temperature Sensor Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient temperature sensor between terminal “+” and “-” whether it is changed by changing of the ambient temperature.


Specification
Ambient temperature [°C(°F)]
 Resistance [kΩ]
 Voltage [V]
-30(-22)
 507
 4.720
-20(-4)
 284.5
 4.522
-10(14)
 164.2
 4.225
0 (32)
 97.5
 3.821
10 (50)
 59.6
 3.322
20 (68)
 37.46
 2.772
30(86)
 24.18
 2.227
40(104)
 16
 1.735
50(122)
 10.83
 1.323

4.
If the measured resistance is not within specification, substitute with a known-good ambient temperature sensor and check for proper operation.
5.
Replace the ambient temperature sensor if it is proved that there is a problem with the sensor.
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, ...

Ambient Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the engine room RH side under cover. (Refer to EM group - “Engine and Trans ...

See also:

Foot Actuator (With Auto Defogging System) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to BD group - “Crash pad”) ...

Rear Seat Replacement
Rear Seat Assembly Replacement 1. After loosening the mounting bolt, then remove the rear seat cushion (A). Tightening torque : ...

Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solen ...

Categories

Copyright www.kirmanual.com 2014-2026