Kia Rio: Cylinder Head Assembly

Installation

1. Dowel pin of crankshaft setted about 3° with vertical center line. 2. Align the TDC marks (A) of the CVVT sprockets with the upper s ...

Valve Clearance Inspection And Adjustment

   Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C) and cylinder head is ...

See also:

LCD display warning (if equipped)
For vehicle’s equipped with smart key system Key is not in vehicle If the smart key is not in the vehicle and if any door is opened or closed with the engine start/stop button in the ACC, ON, ...

Fuel Pump Inspection
[Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Remove the fuel pump assembly. ...

Removal
   When replacing the ECM, the vehicle equipped with immobilizer must be performed the procedure as below. ...