Kia Rio: Muffler: Components

Exhaust Manifold: Removal and Installation

1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque : Witho ...

Muffler: Removal and Installation

1. Disconnect the battery negative terminal. Tightening torque Without battery sensor : 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...

See also:

Ignition Switch Assembly Installation
1. Install the key lock cylinder.    When assembling, the key must be insert ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS termi ...

Rear Bumper Replacement
[5 Door]    • Put on gloves to protect your hands. • ...