Kia Rio: Tightening Torques
| Item |
kgf.m |
N.m |
lb-ft |
| Positive crankcase ventilation valve installation |
0.8 ~ 1.2 |
7.8 ~ 11.8 |
5.8 ~ 8.7 |
| Canister installation bolt/nut |
2.0 ~ 3.0 |
19.6 ~ 29.4 |
14.5 ~ 21.7 |
| Fuel tank air filter installation bolt |
0.4 ~ 0.6 |
3.9 ~ 5.9 |
2.9 ~ 4.3 |
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
Fuel ...
Troubleshooting
Symptom
Suspect area
Engine will not start or hard to start
Vapor hose damaged or disconnected
Engine struggles to start
Malfunction of the Pu ...
See also:
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by signal from control unit. Pressing the intake selection switch will
shift between recirculation and fresh ai ...
Inhibitor Switch Specifications
▷ Type: Combination of output signals from 4 terminals
Power supply (V)
12
Output type
Combination of output signals
Signal Code Table
...
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistan ...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2025 Owners Manual
- Kia Rio YB 2017-2025 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2025