Kia Rio: Intake Air Temperature Sensor (IATS)

Installation

   • Install the component with the specified torques. • ...

Description

Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air tem ...

See also:

Heater & A/C Control Unit (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

Manual Transaxle Installation
   When replacing a clutch housing or transaxle assembly, the wiring bracket should be installed in accordance with the clu ...

Compressor Description
The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of engine. The compressor changes the low pressure and low temperature r ...