Kia Rio: Accelerator Position Sensor (APS)

Installation

   • Install the component with the specified torques. • ...

Description

Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

See also:

Component Location
1. Head cap 2. Nut 3. Rear wiper arm & Blade 4. Packing (rubber) 5. Rear wiper motor assembly 6. Bolt ...

BCM connectors
Pin No. Connector A Connector B Connector C 1 Battery (+) K_LINE Turn signal switch (RH) 2 Ignition 2 Centr ...

SS-B Solenoid Valve(ON/OFF) Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...