Kia Rio Manuals

Kia Rio: Front Lower Arm Replacement - Front Suspension System - Suspension System - Kia Rio UB 2012-2026 Service ManualKia Rio: Front Lower Arm Replacement

1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)



     
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the nut and remove the lower arm (A).
Tightening torque :
58.8 ~ 70.6N.m(6.0 ~ 7.2kgf.m, 43.4 ~ 52.1lb-ft)


3.
Remove the lower arm (C) by loosening the bolt (A) and (B).
Tightening torque :
(A)
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
(B)
156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)


4.
Installation is the reverse of removal.
Front Strut Assembly Inspection
1. Check the components for damage or deformation. 2. Compress and extend the piston rod (A) and check that there is no abnormal resistance ...

Front Lower Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the lower arm for deformation. 3. Check the all bolts ...

See also:

Steering Gear box Reassembly
1. After spreading grease on the rack bar gear part (A), install rack bar (B) in the direction of the arrow.    ...

OBD-II review
1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, O ...

Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Categories

Copyright www.kirmanual.com 2014-2026