Kia Rio: Brake Booster

Operation and Leakage Check

Check all of the following items: Component Procedure Brake Booster (A) Check brake operation by applying the brakes during a test drive. If the brak ...

Components

1. Brake booster 2. Master cylinder assembly 3. O-ring ...

See also:

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Alternator: On-vehicle Inpection
   • Check that the battery cables are connected to the correct terminals. ...

Circuit Diagram
...