Kia Rio: Trunk Trim Replacement
| •
|
Put on gloves to protect your hands.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to without marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the trunk trim.
|
|
2. |
Installation is the reverse of removal.
|
• |
Replace any damage clips.
|
|
1. Luggage side trim [RH]
2. Luggage side trim [LH]
3. Rear transverse trim
4. Luggage partition trim [A type]
5. Rear wheel housing trim [RH]
|
6. Rear wheel housing trim [LH]
7. Rear package tray trim
8. Luggage covering [A type]
9. Luggage partition trim [B type]
10. Luggage covering [B type]
|
|
Door Scuff Trim Replacement
•
Put on gloves to protect your hands.
...
1. Windshield glass
2. Windshield glass moulding
...
See also:
4Door Front Body B
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Engine mounting hole (&O ...
Rear Wiper Motor Inspection
Rear Wiper Motor
1.
Remove the 4P connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cables to terminals ...
Thermostat: Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve upward.
2.
Install the water inlet fitting (A).
...
Interior Trim Replacement
Windshield Glass Components