Kia Rio: SS-B Solenoid Valve(ON/OFF) Circuit Diagram

SS-B Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(&# ...

SS-B Solenoid Valve(ON/OFF) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side ...

Exhaust Manifold: Removal and Installation
1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque : Witho ...

AGM Battery: Removal and Installation
1. Remove the battery. (1) Disconnect the battery terminals (A). Tightening torque (+ ...