Kia Rio: Cylinder Block

Installation

   • Thoroughly clean all parts to be assembled. • ...

Components

1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. Adapter plate ...

See also:

Starter: Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

Shift Lever Components
1. Shift lever knob 2. Shift lever assembly 3. Select cable assembly 4. Shift cable assembly 5. Retainer ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the connector (A), and then remove the sensor ...