Kia Rio: Manifold Absolute Pressure Sensor (MAPS)

Adjustment

ETC module learning procedure When installing new ETC module or re-installing it, ETC module learning procedure must be performed. 1. Hold the ignition key o ...

Description

Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...

See also:

Oil Pump Unit (OPU) Removal
1. Remove the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to “Crash pad” in BD group.) ...

Installation
   • Install the component with the specified torques. • ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...