Kia Rio: Inspection

Horn Inspection

Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal.

1 : 12V Ground(-)

2 : 12V (+)

The horn should make a sound. If the horn fails to make a sound, replace it.

Component Location

1. Horn switch 2. Horn relay (Egine Room Relay) 3. Horn 4. Clock spring ...

Removal

1. Remove the under cover. 2. Remove the mounting nut and disconnect the horn connector, then remove the horn (A). ...

See also:

Service Standard
Item Specification Ignition Timing (°) BTDC 3 ± 10 Idle Speed (rpm) A/C OFF Neutral, N, P-range 630 ± 100 D-rang ...

Rear Torsion Beam Axle Replacement
[Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Specification
Pressure [kPa (kgf/cm², in H2O) Output Voltage (V) -6.67 (-0.068, -26.8) 0.5 0 2.5 +6.67 (0.068, 26.8) 4.5 ...