Kia Rio: On-board Refueling Vapor Recovery (ORVR) valve

Installation

Installation is the reverse of removal. Canister installation bolt/nut: 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...

Removal

1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump�) 2. Remove the ORVR valve (A) after releasing hooks (B) ...

See also:

Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to th ...

ESC Operation Mode
ESC Hydraulic System Diagram 1. ESC Non-operation : Normal braking. Solenoid valve Continuity Valve Motor ...

Front Seat Replacement
   • When removing or installing the front passenger seat, be sure to initialize the Weig ...