Kia Rio: Restraint

Steering Gear box Reassembly

1. After spreading grease on the rack bar gear part (A), install rack bar (B) in the direction of the arrow.    ...

General Information

The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and deploying the drive ...

See also:

Front Lower Arm Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Rear Washer Switch Inspection
1. With the rear wiper & washer switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace t ...

Filler-Neck Assembly Installation
1. Installation is reverse of removal. Filler-neck assembly bracket installation nut : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...