Kia Rio: Hydraulic System

Installation

1. Installation is the reverse of removal.    If the oil seal on the transaxle case side is da ...

Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and g ...

See also:

Removal
1. Drain the brake fluid through the bleed plug (A). 2. Remove the clutch release cylinder assembly (C) after removing the tube (B) ...

Antenna Removal
1. Remove the rear roof trim. (Refer to the Body group - Roof trim). 2. Disconnect the antenna cable and the connector (A). ...

Component Location
1. Power door mirror 2. Power door mirror switch 3. Folding mirror switch ...