Kia Rio: Ignition System
- Description
- On-vehicle Inspection
- Ignition Coil: Description
- Ignition Coil: Specification
- Ignition Coil: Circuit Diagram
- Ignition Coil: Removal
- Ignition Coil: Installation
- Ignition Coil: Inspection
- Spark Plug: Description
- Spark Plug: Specification
- Spark Plug: Inspection
- Spark Plug: Cleaning
- Spark Plug: Removal
- Spark Plug: Installation
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect igni ...
Description
Ignition timing is controlled by the electronic control ignition timing
system.
The standard reference ignition timing data for the engine operating conditions
are pre-pro grammed in the ...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A) ...
High Mounted stop lamp Removal
[4 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connect (A).
3.
Remove ...
Driving your vehicle
Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the vehicle is raised to change
the oil or for any other purpose. If you hear a change in the sound of the ex ...
Copyright © www.kirmanual.com 2014-2024