Kia Rio: Manual Transaxle Components
| 1. Transaxle support mounting bracket 2. Control shaft complete |
3. Back up lamp switch 4. Vehicle speed sensor |
- Manual Transaxle Removal
- Manual Transaxle Installation
- Shift Lever Components
- Shift Lever Removal
- Shift Lever Inspection
- Shift Lever Adjustment
- Back-up Lamp Switch Description
- Back-up Lamp Switch Specifications
- Back-up Lamp Switch Inspection
- Back-up Lamp Switch Replacement
Inspection
Manual Transaxle Oil Inspection
1.
Park the vehicle on a level ground and stop the engine.
2.
Retighten the oil filler plug (A ...
Manual Transaxle Removal
1.
Remove the following items;
A.
Air cleaner assembly (A) and air duct (B) .
(Refer to "Intake and Exhaust system" ...
See also:
Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat belt/door,
the ISG function reacts as follo ...
TPMS Sensor Description
1.
Mode
(1)
Normal Fixed Base State
A.
Sensor transmissions continue at the Low Line
...
Transaxle Control Module (TCM) Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side c ...
Copyright © www.kirmanual.com 2014-2024