Kia Rio: Controller

Intake Actuator Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad. (Refer to BD group - "Crash Pad") ...

Heater & A/C Control Unit (MANUAL) Components

Connector pin function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 Intake Actu ...

See also:

Installation
1. Dowel pin of crankshaft setted about 3° with vertical center line. 2. Align the TDC marks (A) of the CVVT sprockets with the upper s ...

Side Airbag (SAB) Module Installation
   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Blower Resistor (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the blower resistor (B) after loosening th ...