Kia Rio: Tire Pressure Monitoring System

Tire Installation

1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

Components

1. Receiver 2. TPMS Sensor (S1) 3. TPMS Sensor (S4) 4. TPMS Sensor (S2) 5. TPMS Sensor (S3) 6. Tread Lamp ...

See also:

Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Troubleshooting
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to †...